Contact Us
Current time in UK (GMT): 5:25
  • sl-3
    • Prevent Side Wall Build-up
    • Eliminate Material Blockages
    • Maximise Silo Storage Space
    • Low to No Maintenance Requirements
    • Easy to Retro Fit
    • Fully Automated
  • sl-2
    • Prevents Side Wall Build Up
    • Eliminate Material Bridging
    • Low to no maintainance
    • Easy to Retro Fit
    • Maximise Silo Storage Space
    • Fully Automated
  • Silos & Hoppers
    • Prevent Side Wall Build-up
    • Eliminate Bridging & Ratholing
    • Maximise Product Flow
    • Maintain Optimal Storage Capacity
    • Eliminate Damage Caused by Vibrators
    • Successfully Fluidise Materials 
  • sl-4
    • Prevent Particulate Build-up
    • Eliminate Material Blockages
    • Maintain Product Flow
    • Maximise Bulk Storage Space
    • Lower Maintenance Requirements
    • Reduce Unplanned Shutdowns
  • quattro-slide
    • Prevent Ash Build-up on Boiler Tubes
    • Eliminate Tube Corrosion and Erosion
    • 360° Cleaning
    • No Costly Maintenance
    • Easy to Retro Fit
    • Fully Automated
  • prima-slide
    • A Multi-Site Cleaning Solution
    • Unblock clogged up Silos, Hoppers & Bins
    • Maintain & Clean Operating Conditions
    • Reduce Health & Safety Risks
    • Rapid & Reliable Equipment
    • On Site Training Available
  • Acoustic Cleaners
  • Wood Industry
  • Silos & Hoppers
  • Cement Industry
  • Sonic Soot Blowers
  • Prima Whip

Latest News

View all »

Acoustic Cleaning Systems and the Alternatives

Steam Soot Blowers – the employment of these somewhat primitive and abrasive boiler tube cleaning systems is certainly in decline and have an ever increasing request to replace both the retractable lance and rotary type Soot Blower units with our Acoustic Cleaners and Sonic Soot Blowers. The reasons given by Power Generation plant engineers wishing to replace their Steam Soot Blowers are that they are costly to purchase, install, operate and maintain. In addition, they are generally only used on an eight hour cycle thus allowing the ash to build up and sinter or 'bake' on the heat tubes. They also cannot clean the entire circumference of each tube, rather they strike the leading edge of the tube and thus give rise to the very costly twin problems of tube erosion and corrosion.

Primasonics Acoustic Cleaners and Sonic Soot Blowers can be installed in either redundant Steam Soot Blower portholes or other available hatches. Rather than wait until the end of each 8-hour shift before being operated, as with Steam Soot Blowers, Primasonics Acoustic Cleaning Systems are 'sounded' for a few seconds at predetermined intervals thus preventing ash from building up in the first place. Therefore, because ash is not allowed to reside on hot tube surfaces, it cannot sinter and become a permanent 'insulator'. This means that with either Acoustic Cleaners or Sonic Soot Blowers installed, thermal efficiency is increased and remember, sound waves 'envelop' the entire circumference of each tube without causing any damage to tube bundles or structures.

Sonic Soot Blower on a Boiler

Pictured: Sonic Soot Blower installed on a Boiler.

Read more about the Benefits of Acoustic Cleaners and the Benefits of Sonic Soot Blowers or follow the links below to view more comparisons between Acoustic Cleaning Systems and the Alternatives.

sonic-horns

Primasonics Sonic Horns bring innovative, cost effective solutions to prevent particulate build up and facilitate material flow wherever ash, powders or granules are generated, manufactured, stored or transported.

Visit Website

quattro

Quattrosonics Sonic Soot Blowers offer a cost-effective and non-destructive way to prevent particulate build-up. Using high energy and low frequency sound waves, they provide 360° cleaning coverage without risk of corrosion.

View Range