Acoustic Cleaning
Acoustic Cleaning encompasses the realm of sound transmission through solids. It is best described by the creation of rapid pressure fluctuations. These pressure fluctuations are transmitted into the particulate matter or "bonded" dry material causing the solid particles to resonate and dislodge from the surface they are deposited on or bonded to. Once dislodged, the materials fall, either due to gravity or are carried away by the gas or air stream within the process.
The powerful sound waves are produced when the short bursts of standard plant compressed air enter the wave generator and force the only moving part, an aerospace grade titanium diaphragm to flex creating the powerful "base" sound wave. This "base" tone is then transmitted by a range of different bell sections into selected fundamental frequencies between 60 - 420Hz for the Audiosonic Range or between 11 - 25 Hz for the Infrasonic (PIS) Range.
Primasonics® Acoustic Cleaners comprise a wave generator and resonance section or amplifier. The wave generator may be either within the audible PAS range or within the lower frequency inaudible PIS range. We provide detailed on-site process evaluation and our experienced staff will quickly identify the correct Acoustic Cleaning system to solve your particular material build up and flow problems.
Our systems will significantly aid material flow and eliminate particulate build up within a wide range of industries and process applications.
This non-intrusive, affordable technology will increase the efficiency of process plant, provide improved thermal conductivity, prevent material blockage and remove particulate build up wherever ash, dust, powders or granular materials are processed, generated, stored or transported.
